2007-2013 Toyota Tundra LED Bulbs

What is the correct upgrade for the Toyota Tundra lighting system?

This is a concern from Tundra owners as Toyota Tundra OEM bulbs tend to fade out and dim off over time due to the limited life span.

Choosing LED bulbs instead of factory halogen bulbs is the easiest way to upgrade your 2007-2013 Toyota Tundra light bulbs. Not only are they bright, but also long-lasting so you won't have to worry about constantly replacing them.

After testing and research, AUXITO has assembled the complete upgrading kit of LED bulb for the 2007-2013 Tundra that makes it easy to upgrade your Toyota Tundra light bulbs for all interior and exterior light types, such as headlight bulbs, fog lights, Reverse lights, brake lights, license plate, dome lights, map lights, and more.

LED FORWARD LIGHTING

2007-2013 Toyota Tundra led headlight bulbs

Bulb Size: High Beam 9005/HB3; Low Beam H11/H8

• Y13 Series, 40W/bulb, 8000LM/bulb, 6500K Xenon White, 1,2000RPM Turbo Cooling Fan

Forward lighting has been known to be a problem with the 2007-2013 Toyota Tundra, especially performed terribly when driving at night. The brightness of the Toyota tundra headlight bulb at 25 feet from the wall is only 250 lux, which is equivalent to taping a couple of Zippo lighters to the front of your truck.

Choosing the Y13 series of LED headlight bulbs to upgrade is a HUGE improvement to the Stock setup. Compare them to OEM halogens and you get the uniform Beam Patterns, Consistent light across the Beam, no Glare/Fuzziness above the Hot-Spot, and a Defined Cut-Off line that you desire.

• 360-Degree illumination, Perfect Beam Pattern

• CAN-BUS Error-free, Plug & Play Installation

• Upgraded Independent Drivers, 50,000hrs Long-lasting

• LMP Chip - Newer Technology than CSP

2007-2013 Toyota Tundra led fog light bulbs

Bulb Size: H10/9140/9145

• 4000 LM/Pair; 6500K Xenon White; CSP LED Chips;

300% Brightness & Long Lifespan | Easy Installation &1:1 Safe Beam Pattern | Cool White & Waterproof

Whether you want cleaner front light output or want to improve visibility in inclement weather like snow and fog, LED fog lights are still the best choice for your Tundra. With the LED fog light upgrade the light pattern in front of the Tundra looks better and does not cause glare to oncoming traffic.

LED EXTERIOR LIGHTING

2007-2013 Toyota Tundra Reverse Light Bulbs

Bulb Size: 912/T15

• DC12V, 2600LM/Pair, 6000K Xenon White

360° LED lighting provides more illuminated visibility for your reversing vehicle.

2007-2013 Toyota Tundra Brake Light Bulbs

Bulb Size: 3157/3156

• DC12V, 2600LM/Pair, Red

Using 54 4014-SMD LED chips on brake light bulbs. Canbus pass by error check for the 2007-2013 Toyota Tundra. No need for any modification, just for plug-n-play installation.

The factory incandescent brake lights on the Toyota Tundra light up in a glow, which takes a moment to turn on. Modern LED bulb upgrades offer an instant response, which can alert other drivers behind them sooner, while also providing a modern LED appearance.

2007-2013 Toyota Tundra License Plate Light Bulbs

Bulb Size: T10/194/168

• DC12V, 2W/bulb, 6000K white

The 14E series 194/T10 LED bulbs are equipped with 14 pieces of 6000K~6500K white high illumination 2835 SMD LED. 360-degree lighting angle with huge brightness, no dark spots. It brings to your 2007-2013 Toyota Tundra a pure white super bright light output, 300% brighter than the original halogen lamp.

2007-2013 Toyota Tundra Front Side Marker Light Bulbs

Bulb Size: T10/194/168

12V, Amber yellow, 2W/PC, 240 Lumens, 24 pcs high quality 3014 LED chips

LED INTERIOR LIGHTING

2007-2013 Toyota Tundra Dome Light Bulbs

Bulb Size: T10/194/168

2007-2013 Toyota Tundra Map Light Bulbs

Bulb Size: T10/194/168

• 2E Series; DC12V; 2W/bulb; 6000K white

All those incandescent bulbs dotted throughout your interior provide a super dull experience when sitting in your 2007-2013 Toyota Tundra. The best upgrade is to replace them with LED lights. The 2E Series T10 LED bulbs are non-polarized, plug and play, avoiding the hassle of repeated installations due to polarity issues.

Please note: When replacing the map light bulb or dome light bulb, do not remove the bulbs with your fingers as they are extremely hot. To remove them, use a pair of needle-nose plyers.

Package Includes

• 2 Y13 Series 9005 led headlight bulbs ( High beam)

• 2 Y13 Series H11 led headlight bulbs ( Low beam)

• 2 I9 Series H10 led bulbs (Fog Lights)

• 2 T15 White (Reverse Lights)

• 2 3157 Red ( Brake Lights)

• 6 T10 White (Dome/ Map/ License Plate Light(3*2pcs/set))

• 2 T10 White (Front Side Marker Light)

Please Note: we do not include tundra front turn signal bulbs in the package. After customer feedback, installing LED turn signals in the Tundra causes the hyper flash. If you still want brighter LED turn signals for your Tundra, you can try installing a resistor decoder to fix the problem.