Ametech RESTORE Engine Oil Power Restorer & Lubricant With CSL 1 Litre

Ametech Engine RESTORE Oil is a life saver for worn, tired and smoky engines and will balance out compression across the cylinders even in newer engines. RESTORE reduces engine noise and has even been known to cure fledgling bottom end knock. All used engines, but particularly those that have clocked up more than 40,000 miles, will benefit from the use of RESTORE - after treatment you will notice less smoke, less oil burn, fewer start up problems and the engine will run smoother and quieter.
An EP (extreme pressure) lubricant in its own right, Ametech Engine RESTORE Oil just needs a standard motor oil to act as a carrier for it in your engine - not friction reducing oils containing plant esters (such as Castrol Magnatec or racing formulas such as Silkolene R), as are formulated to polarise metals and will just repel RESTOREs CSL particles, preventing them from reaching the worn metalwork in the engine. RESTORE can also be used in MANUAL gearboxes, where it is helpful in reducing whine by reversing wear in the bronze bearings and reducing back-lash by re aligning the gears. Do not use RESTORE in automatic gearboxes, we have another product called MT10 Metal Treatment which reduces friction and heat in automatic gearboxes, smoothing out the metal and reducing whine.

Ametech Engine RESTORE Oil is suitable for use in all four stroke petrol and diesel engines, with the exception of HEUI engines (hydraulically actuated electronic unit injection diesel engines), VVT-Li engines (VVT Lift-intelligent) and other engines using oil pressure to actuate Variable Valve Timing (VVT), such as Toyota VVTi, Honda VTec and iVTec engines, BMW Vanos and Double or Dual Vanos, Subaru ACVS systems etc. all these engines utilise the engine oil pressure to actuate other engine functions and often do not tolerate particles in oil.

RESTORE is safe to use in standard dual fuelled and lpg engines, most standard (mechanical) VVT engines and engines with turbo-chargers and catalytic converters. RESTORE should not be used in wet clutch environments or in a Petroil mix. More information can be found on amtech's website.

One Litre can of RESTORE will treat up to 4-5 litres of engine capacity or 10 litres of oil in the sump. The rules of thumb for working out the correct dosage for a first time treatment in your engine are: 200-250ml Ametech Engine RESTORE Oil per litre of engine size (cc), 10% RESTORE by volume to engine oil. Order multiples of this size of can for each 5000cc of engine size you wish to treat. For repeat treatments use half the initial dosage or 5% RESTORE by volume to engine oil. For best results, add to a clean engine with fresh oil and filter. Just shake it up and pour it in.

Product Features

• Cure Blue Smoke and exhaust emissions.
• Restore Compression.
• Reduce Oil Consumption.
• Restore Horsepower and Torque.
• Improve MPG.
• Improve cold starting ability.
• Prolong Engine Life.
• Contribute towards reducing Global Warming by reducing CO emissions and extending the usable life of old engines.
• Repair fishing boat engines and tractor engines without any downtime.
• Size: 1 Litre.