Textar DOT 4 Brake Fluid (1L)

Textar brake fluid is the number one choice for dealerships across the country and is compatible with many different manufacturers.  If you are looking for a quality brake and clutch fluid, that doesn't break the bank, this is your reason to try today!

Textar 260 DOT 4 /160 Brake and Clutch Fluid, 1 Liter

Specifications & Performance:

U.S. FMVSS No. 116 Dot 3 & Dot 4, SAE J 1073, SAE J 1704, ISO 4925 (Classes 3, & 4), JIS K2233 (Classes 3 & 4)
Ford M6C9103A; Mazda MN 120 C; Nissan NR3, NR4; Toyota Class 3, Class 4

**Textar 260 DOT 4 mixes safely with other brake and clutch fluids conforming to the above specifications.

Typical Dry Boiling Point: 270 °C. (518 °F)
Typical Wet Boiling Point: 163 °C. (325 °F)
Typical Viscosity @ -40 °C.: 1315 cSt

NOT SUITABLE FOR VEHICLES WITH MINERAL BASED BRAKE OR CLUTCH SYSTEMS.

The Textar 260 DOT 4 /160 is a synthetic brake and clutch fluid based on borate ester technology, together with a comprehensive inhibitor package. DOT 4 fluids are widely used in Europe because of their greater resistance to boiling point decline in service and are recommended by most vehicle manufacturers.

This is Textar’s “mainstream” aftermarket brake fluid, and as such has wide applicability including cars, motorcycles and light trucks.

Textar products are tested to standards beyond what would be normal. For example, this product has a minimum dry and wet boiling point of 260°C and 160°C respectively, greatly exceeding the DOT 4 minimums of 230°C / 155°C. This amounts to extra user safety and potentially product life.

As one would expect from a major brake manufacturer, expertise gained from long experience of working with braking systems and vehicle manufacturers benefits our entire product range with products being tested to standards far above the normal.

Features and Benefits:

• High boiling point to resist vapor lock.
• Borate ester technology allows better retention of boiling point in service.
• Good lubricity
• High thermal stability
• Controlled rubber swelling
• Anti-corrosion and oxidation protection

Recommendations for use:

• Vehicles for which a DOT 4 fluid is specified
• Vehicles fitted with antilock systems
• Can be used in vehicles fitted with Electronic Stability Programs (ESP) in most European climates. (In very cold climates Textar DOT 4 LV is recommended)
• Hydraulic clutch systems

Storage and Handling:

This product is hygroscopic –it will absorb water from the atmosphere; always ensure containers are tightly closed. Not compatible with mineral oil or petroleum based materials; any contamination may cause serious damage to the brake system. Product will strip paint –avoid contact with paint of lacquer. Store in original container in a clean and dry location.
Product is of low toxicity but has an irritant effect on the eye. Avoid contact with eyes and skin. Observe normal good hygiene practices when handling this product.