2x E-Tech Silver Engine Spray On Enamel Paint High Temp Heat Resistant +Caps

• E-TECH Engine enamel is a high quality, long lasting, enamel coating specially formulated with a ceramic resin to cope with temperatures of up to 250°C, and is suitable for use on most engine parts and components.
• Ideal for engine blocks, valve/rocker covers and gearbox/differential casings, plus other engine bay components.
• The spray-on application is simple to apply, quick drying and provides a hard, chip resistant, long lasting finish which will retain its colour due to the high pigment content.

• Long lasting high quality finish.
• Tough chip and crack resistant formula.
• Resists oil, engine additives, chemicals, road salt & weathering.
• Excellent durability.
• No primer needed - strong adhesion to bare steel and metal.
• Colour : Silver.
• Can Size 400ml each.
• It is a spray on application so quick drying and provides a hard, chip resistant, long lasting finish which retains its colour due to the high pigment content.
• Long term performance of this paint on aluminium and stainless steel surfaces cannot be guaranteed.
• Not suitable for brass and other non-ferrous metals.

• For best results ensure the engine or part you are painting, and the paint are at room temperature before use (approx 17°C to 21°C).
• For best results apply in a warm, dry and dust free area.
• Use a steel brush to remove loose dirt and rust deposits from surface to be painted.
• Then clean the area to be painted thoroughly with a degreaser or steam cleaner, removing all traces of silicone, oil, dirt, grease etc.
• Mask off any area that you do not want to be painted.
• The area to be painted must be completely dry and thoroughly clean before you start.

• Shake can vigorously for a minimum of 2 minutes before use.
• Hold can 20-30cm (8-12") from surface and spray using a smooth side to side motion.
• Build up layers with several thin coats allowing approximately 15-20 minutes between coats for the surface to dry to a tacky film (do not apply heavy coats).
• Shake can between coats.
• After applying the final coat allow 4 hours for the enamel to dry properly.

The 4Tress Chrome Tyre Valve Dust Caps screw onto the valve stem of a car tyre to protect it from dust and debris. These particular caps have a sleek and stylish design with a tree emblem on the top, and they are made of high-quality chrome material that is both durable and rust-resistant.

All images are for illustrative purposes only. Product Design and packaging are subject to manufacturers' changes without prior notice.